Defender 90 200Tdi Rear Crossmember with 470mm Extensions (1984-1996) for the Land Rover Defender 90 200Tdi, 1984-1996. Made in the UK by DDS Metals.
The rear crossmember takes towing loads and holds the back of the body, and it traps mud and water along its top and ends. Rot here is one of the most common Land Rover chassis repairs. A new crossmember or end section restores strength for towing, recovery points and the rear body mounts.
Details: 200 Tdi – na/Td (1984-1996) Defender 90″ rear crossmember with 470 leg extensions with no anti-roll brackets rear crossmember LR510 (ANR2056 BR3379) welded with fitted Defender 90 rear chassis legs 470mm long fully profiled welded legs with joggled ends to sleeve over old chassis for ease of welding and added strength fitted with 4mm pressed towing brackets & standard exhaust brackets as OE spec from chassis Land Rover part number: STC8650 we highly recommend once fitted you use a Waxoyl or equivalent to get into all the assembly to help protect the internal side of the assembly to protect from rust available in LR511 standard thickness OE black powder coated finish LR511G standard thickness OE hot dip galvanised finish LR511Hd 3mm heavy duty black powder coated finish LR511Hdg 3mm heavy duty hot dip galvanised finish.
Fits: Land Rover Defender 90 200Tdi, 1984-1996
Specification (choose above): Standard – made to OE specification; Heavy duty – made from thicker steel for extra strength, ideal for vehicles that tow heavy loads or work hard off-road.
Finish (choose above): Black powder coated – black powder coated, ready to fit; Galvanised – hot-dip galvanised for long-term corrosion protection.
DDS part numbers: LR511, LR511G, LR511HD, LR511HDG
Land Rover part numbers (for reference): STC8650, ANR2056
Not sure this is the right part for your vehicle? Get in touch with your vehicle details or VIN and we'll confirm fitment before you order.
Defender 90 200Tdi Rear Crossmember with 470mm Extensions (1984-1996) for the Land Rover Defender 90 200Tdi, 1984-1996. Made in the UK by DDS Metals.
The rear crossmember takes towing loads and holds the back of the body, and it traps mud and water along its top and ends. Rot here is one of the most common Land Rover chassis repairs. A new crossmember or end section restores strength for towing, recovery points and the rear body mounts.
Details: 200 Tdi – na/Td (1984-1996) Defender 90″ rear crossmember with 470 leg extensions with no anti-roll brackets rear crossmember LR510 (ANR2056 BR3379) welded with fitted Defender 90 rear chassis legs 470mm long fully profiled welded legs with joggled ends to sleeve over old chassis for ease of welding and added strength fitted with 4mm pressed towing brackets & standard exhaust brackets as OE spec from chassis Land Rover part number: STC8650 we highly recommend once fitted you use a Waxoyl or equivalent to get into all the assembly to help protect the internal side of the assembly to protect from rust available in LR511 standard thickness OE black powder coated finish LR511G standard thickness OE hot dip galvanised finish LR511Hd 3mm heavy duty black powder coated finish LR511Hdg 3mm heavy duty hot dip galvanised finish.
Fits: Land Rover Defender 90 200Tdi, 1984-1996
Specification (choose above): Standard – made to OE specification; Heavy duty – made from thicker steel for extra strength, ideal for vehicles that tow heavy loads or work hard off-road.
Finish (choose above): Black powder coated – black powder coated, ready to fit; Galvanised – hot-dip galvanised for long-term corrosion protection.
DDS part numbers: LR511, LR511G, LR511HD, LR511HDG
Land Rover part numbers (for reference): STC8650, ANR2056
Not sure this is the right part for your vehicle? Get in touch with your vehicle details or VIN and we'll confirm fitment before you order.
