Accessories & Protection
A pair of awning mount plates, added to the left or right side of your MCB 4x4 roof rack when it’s made. No awning bracket is supplied: the plates are for you to drill and fit your own awning brackets.
Choose where they go in the roof rack builder, or tell us in the placement box when you order.
Hand made to order in the UK. Lead time: 3-5 Weeks (depending on area).
A pair of Hi-Lift jack mount plates, added to your MCB 4x4 roof rack when it’s made. No jack mount is supplied: the plates are for you to drill and fit your own Hi-Lift jack mount.
Choose where they go in the roof rack builder, or tell us in the placement box when you order.
Hand made to order in the UK. Lead time: 3-5 Weeks (depending on area).
Handmade Discovery 2 roof tent roof rack from MCB 4x4, built to order from steel in their Huddersfield workshop, where they have been making roof racks since 2004.
A roof tent rack for the Discovery 2, with an upper rail around the front only. It sits halfway between a flat rack and an expedition rack, and the front rail protects your tent from branches.
Construction
- Mild steel, hand welded
- Zinc primed, then powder coated in satin black as standard (other finishes below)
- Lighter than most aluminium racks
- Made to fit the Discovery 2
Options and extras
Design it your way: open this rack in our roof rack builder to choose the finish, mesh and mounts, place each mount on a drawing of the rack, and add the whole build to your cart in one go.
- Finish (choose above): black powder coat (RAL 9005) as standard; white (RAL 9016) or gunmetal grey (RAL 7016) +£20; Land Rover off white (RAL 9010) +£40; Land Rover colours +£80, each the closest RAL match to the original Land Rover paint code; any other colour +£120; galvanised +£150
- Mesh base: +£90 (choose above)
- Rear access ladder: £100
- Light / CB mounts: £12 each
- Awning mount plates, Hi-Lift jack mount plates and sand ladder mounts: £40 a pair
- Solid bases and custom mounts: message us for a price
Lead time
Every rack is made to order. Lead time: 3-5 Weeks (depending on area). If you need something custom, get in touch before ordering.
Rear ladder for purchase with any roof rack, custom made to your vehicle.
Hand made to order in the UK.
Lead time: 3-5 Weeks (depending on area).
Handmade Defender 90 roof tent roof rack from MCB 4x4, built to order from steel in their Huddersfield workshop, where they have been making roof racks since 2004.
A roof tent rack for the Defender 90, with an upper rail around the front only. It sits halfway between a flat rack and an expedition rack, and the front rail protects your tent from branches.
Construction
- Mild steel, hand welded
- Zinc primed, then powder coated in satin black as standard (other finishes below)
- Lighter than most aluminium racks
- Made to fit the Defender 90
Options and extras
Design it your way: open this rack in our roof rack builder to choose the finish, mesh and mounts, place each mount on a drawing of the rack, and add the whole build to your cart in one go.
- Finish (choose above): black powder coat (RAL 9005) as standard; white (RAL 9016) or gunmetal grey (RAL 7016) +£20; Land Rover off white (RAL 9010) +£40; Land Rover colours +£80, each the closest RAL match to the original Land Rover paint code; any other colour +£120; galvanised +£150
- Mesh base: +£90 (choose above)
- Rear access ladder: £100
- Light / CB mounts: £12 each
- Awning mount plates, Hi-Lift jack mount plates and sand ladder mounts: £40 a pair
- Solid bases and custom mounts: message us for a price
Lead time
Every rack is made to order. Lead time: 3-5 Weeks (depending on area). If you need something custom, get in touch before ordering.
Handmade Defender 110 roof tent roof rack from MCB 4x4, built to order from steel in their Huddersfield workshop, where they have been making roof racks since 2004.
A roof tent rack for the Defender 110, with an upper rail around the front only. It sits halfway between a flat rack and an expedition rack, and the front rail protects your tent from branches.
Construction
- Mild steel, hand welded
- Zinc primed, then powder coated in satin black as standard (other finishes below)
- Lighter than most aluminium racks
- Made to fit the Defender 110
Options and extras
Design it your way: open this rack in our roof rack builder to choose the finish, mesh and mounts, place each mount on a drawing of the rack, and add the whole build to your cart in one go.
- Finish (choose above): black powder coat (RAL 9005) as standard; white (RAL 9016) or gunmetal grey (RAL 7016) +£20; Land Rover off white (RAL 9010) +£40; Land Rover colours +£80, each the closest RAL match to the original Land Rover paint code; any other colour +£120; galvanised +£150
- Mesh base: +£90 (choose above)
- Rear access ladder: £100
- Light / CB mounts: £12 each
- Awning mount plates, Hi-Lift jack mount plates and sand ladder mounts: £40 a pair
- Solid bases and custom mounts: message us for a price
Lead time
Every rack is made to order. Lead time: 3-5 Weeks (depending on area). If you need something custom, get in touch before ordering.
Handmade Defender 110 expedition roof rack from MCB 4x4, built to order from steel in their Huddersfield workshop, where they have been making roof racks since 2004.
An expedition rack for the Defender 110, with an upper rail around the whole rack. This makes it easier to keep smaller boxes, bags and jerry cans on the roof, but it does add height.
Construction
- Mild steel, hand welded
- Zinc primed, then powder coated in satin black as standard (other finishes below)
- Lighter than most aluminium racks
- Made to fit the Defender 110
Options and extras
Design it your way: open this rack in our roof rack builder to choose the finish, mesh and mounts, place each mount on a drawing of the rack, and add the whole build to your cart in one go.
- Finish (choose above): black powder coat (RAL 9005) as standard; white (RAL 9016) or gunmetal grey (RAL 7016) +£20; Land Rover off white (RAL 9010) +£40; Land Rover colours +£80, each the closest RAL match to the original Land Rover paint code; any other colour +£120; galvanised +£150
- Mesh base: +£90 (choose above)
- Rear access ladder: £100
- Light / CB mounts: £12 each
- Awning mount plates, Hi-Lift jack mount plates and sand ladder mounts: £40 a pair
- Solid bases and custom mounts: message us for a price
Lead time
Every rack is made to order. Lead time: 3-5 Weeks (depending on area). If you need something custom, get in touch before ordering.
Handmade Defender 110 flat roof rack from MCB 4x4, built to order from steel in their Huddersfield workshop, where they have been making roof racks since 2004.
A flat rack, exactly as it sounds: there is nothing above the base of the rack. It sits around 50mm above the roof of your Defender 110, so you can still use multi-storey car parks and most garages, and it gives you a strong platform for a roof tent, roof box, sand ladders or general kit.
Construction
- Mild steel, hand welded
- Zinc primed, then powder coated in satin black as standard (other finishes below)
- Lighter than most aluminium racks
- Made to fit the Defender 110
Options and extras
Design it your way: open this rack in our roof rack builder to choose the finish, mesh and mounts, place each mount on a drawing of the rack, and add the whole build to your cart in one go.
- Finish (choose above): black powder coat (RAL 9005) as standard; white (RAL 9016) or gunmetal grey (RAL 7016) +£20; Land Rover off white (RAL 9010) +£40; Land Rover colours +£80, each the closest RAL match to the original Land Rover paint code; any other colour +£120; galvanised +£150
- Mesh base: +£90 (choose above)
- Rear access ladder: £100
- Light / CB mounts: £12 each
- Awning mount plates, Hi-Lift jack mount plates and sand ladder mounts: £40 a pair
- Solid bases and custom mounts: message us for a price
Lead time
Every rack is made to order. Lead time: 3-5 Weeks (depending on area). If you need something custom, get in touch before ordering.
Handmade Defender 110 half roof rack from MCB 4x4, built to order from steel in their Huddersfield workshop, where they have been making roof racks since 2004.
A shorter half-length rack for the Defender 110. It's lighter and cheaper than a full-length rack, and ideal for carrying a spare wheel, a roof box or lights while leaving the rest of the roof clear.
Construction
- Mild steel, hand welded
- Zinc primed, then powder coated in satin black as standard (other finishes below)
- Lighter than most aluminium racks
- Made to fit the Defender 110
Options and extras
Design it your way: open this rack in our roof rack builder to choose the finish, mesh and mounts, place each mount on a drawing of the rack, and add the whole build to your cart in one go.
- Finish (choose above): black powder coat (RAL 9005) as standard; white (RAL 9016) or gunmetal grey (RAL 7016) +£20; Land Rover off white (RAL 9010) +£40; Land Rover colours +£80, each the closest RAL match to the original Land Rover paint code; any other colour +£120; galvanised +£150
- Mesh base: +£70 (choose above)
- Rear access ladder: £100
- Light / CB mounts: £12 each
- Awning mount plates, Hi-Lift jack mount plates and sand ladder mounts: £40 a pair
- Solid bases and custom mounts: message us for a price
Lead time
Every rack is made to order. Lead time: 3-5 Weeks (depending on area). If you need something custom, get in touch before ordering.
Handmade Defender 110 Crew Cab expedition roof rack from MCB 4x4, built to order from steel in their Huddersfield workshop, where they have been making roof racks since 2004.
An expedition rack for the Defender 110 Crew Cab, with an upper rail around the whole rack. This makes it easier to keep smaller boxes, bags and jerry cans on the roof, but it does add height.
Construction
- Mild steel, hand welded
- Zinc primed, then powder coated in satin black as standard (other finishes below)
- Lighter than most aluminium racks
- Made to fit the Defender 110 Crew Cab
Options and extras
Design it your way: open this rack in our roof rack builder to choose the finish, mesh and mounts, place each mount on a drawing of the rack, and add the whole build to your cart in one go.
- Finish (choose above): black powder coat (RAL 9005) as standard; white (RAL 9016) or gunmetal grey (RAL 7016) +£20; Land Rover off white (RAL 9010) +£40; Land Rover colours +£80, each the closest RAL match to the original Land Rover paint code; any other colour +£120; galvanised +£150
- Mesh base: +£70 (choose above)
- Rear access ladder: £100
- Light / CB mounts: £12 each
- Awning mount plates, Hi-Lift jack mount plates and sand ladder mounts: £40 a pair
- Solid bases and custom mounts: message us for a price
Lead time
Every rack is made to order. Lead time: 3-5 Weeks (depending on area). If you need something custom, get in touch before ordering.
Handmade Defender 110 Crew Cab flat roof rack from MCB 4x4, built to order from steel in their Huddersfield workshop, where they have been making roof racks since 2004.
A flat rack, exactly as it sounds: there is nothing above the base of the rack. It sits around 50mm above the roof of your Defender 110 Crew Cab, so you can still use multi-storey car parks and most garages, and it gives you a strong platform for a roof tent, roof box, sand ladders or general kit.
Construction
- Mild steel, hand welded
- Zinc primed, then powder coated in satin black as standard (other finishes below)
- Lighter than most aluminium racks
- Made to fit the Defender 110 Crew Cab
Options and extras
Design it your way: open this rack in our roof rack builder to choose the finish, mesh and mounts, place each mount on a drawing of the rack, and add the whole build to your cart in one go.
- Finish (choose above): black powder coat (RAL 9005) as standard; white (RAL 9016) or gunmetal grey (RAL 7016) +£20; Land Rover off white (RAL 9010) +£40; Land Rover colours +£80, each the closest RAL match to the original Land Rover paint code; any other colour +£120; galvanised +£150
- Mesh base: +£70 (choose above)
- Rear access ladder: £100
- Light / CB mounts: £12 each
- Awning mount plates, Hi-Lift jack mount plates and sand ladder mounts: £40 a pair
- Solid bases and custom mounts: message us for a price
Lead time
Every rack is made to order. Lead time: 3-5 Weeks (depending on area). If you need something custom, get in touch before ordering.
Handmade Discovery 2 flat roof rack from MCB 4x4, built to order from steel in their Huddersfield workshop, where they have been making roof racks since 2004.
A flat rack, exactly as it sounds: there is nothing above the base of the rack. It sits around 50mm above the roof of your Discovery 2, so you can still use multi-storey car parks and most garages, and it gives you a strong platform for a roof tent, roof box, sand ladders or general kit.
Construction
- Mild steel, hand welded
- Zinc primed, then powder coated in satin black as standard (other finishes below)
- Lighter than most aluminium racks
- Made to fit the Discovery 2
Options and extras
Design it your way: open this rack in our roof rack builder to choose the finish, mesh and mounts, place each mount on a drawing of the rack, and add the whole build to your cart in one go.
- Finish (choose above): black powder coat (RAL 9005) as standard; white (RAL 9016) or gunmetal grey (RAL 7016) +£20; Land Rover off white (RAL 9010) +£40; Land Rover colours +£80, each the closest RAL match to the original Land Rover paint code; any other colour +£120; galvanised +£150
- Mesh base: +£90 (choose above)
- Rear access ladder: £100
- Light / CB mounts: £12 each
- Awning mount plates, Hi-Lift jack mount plates and sand ladder mounts: £40 a pair
- Solid bases and custom mounts: message us for a price
Lead time
Every rack is made to order. Lead time: 3-5 Weeks (depending on area). If you need something custom, get in touch before ordering.
Handmade Discovery 2 expedition roof rack from MCB 4x4, built to order from steel in their Huddersfield workshop, where they have been making roof racks since 2004.
An expedition rack for the Discovery 2, with an upper rail around the whole rack. This makes it easier to keep smaller boxes, bags and jerry cans on the roof, but it does add height.
Construction
- Mild steel, hand welded
- Zinc primed, then powder coated in satin black as standard (other finishes below)
- Lighter than most aluminium racks
- Made to fit the Discovery 2
Options and extras
Design it your way: open this rack in our roof rack builder to choose the finish, mesh and mounts, place each mount on a drawing of the rack, and add the whole build to your cart in one go.
- Finish (choose above): black powder coat (RAL 9005) as standard; white (RAL 9016) or gunmetal grey (RAL 7016) +£20; Land Rover off white (RAL 9010) +£40; Land Rover colours +£80, each the closest RAL match to the original Land Rover paint code; any other colour +£120; galvanised +£150
- Mesh base: +£90 (choose above)
- Rear access ladder: £100
- Light / CB mounts: £12 each
- Awning mount plates, Hi-Lift jack mount plates and sand ladder mounts: £40 a pair
- Solid bases and custom mounts: message us for a price
Lead time
Every rack is made to order. Lead time: 3-5 Weeks (depending on area). If you need something custom, get in touch before ordering.
Handmade Discovery 2 half roof rack from MCB 4x4, built to order from steel in their Huddersfield workshop, where they have been making roof racks since 2004.
A shorter half-length rack for the Discovery 2. It's lighter and cheaper than a full-length rack, and ideal for carrying a spare wheel, a roof box or lights while leaving the rest of the roof clear.
Construction
- Mild steel, hand welded
- Zinc primed, then powder coated in satin black as standard (other finishes below)
- Lighter than most aluminium racks
- Made to fit the Discovery 2
Options and extras
Design it your way: open this rack in our roof rack builder to choose the finish, mesh and mounts, place each mount on a drawing of the rack, and add the whole build to your cart in one go.
- Finish (choose above): black powder coat (RAL 9005) as standard; white (RAL 9016) or gunmetal grey (RAL 7016) +£20; Land Rover off white (RAL 9010) +£40; Land Rover colours +£80, each the closest RAL match to the original Land Rover paint code; any other colour +£120; galvanised +£150
- Mesh base: +£70 (choose above)
- Rear access ladder: £100
- Light / CB mounts: £12 each
- Awning mount plates, Hi-Lift jack mount plates and sand ladder mounts: £40 a pair
- Solid bases and custom mounts: message us for a price
Lead time
Every rack is made to order. Lead time: 3-5 Weeks (depending on area). If you need something custom, get in touch before ordering.
Handmade Defender 90 expedition roof rack from MCB 4x4, built to order from steel in their Huddersfield workshop, where they have been making roof racks since 2004.
An expedition rack for the Defender 90, with an upper rail around the whole rack. This makes it easier to keep smaller boxes, bags and jerry cans on the roof, but it does add height.
Construction
- Mild steel, hand welded
- Zinc primed, then powder coated in satin black as standard (other finishes below)
- Lighter than most aluminium racks
- Made to fit the Defender 90
Options and extras
Design it your way: open this rack in our roof rack builder to choose the finish, mesh and mounts, place each mount on a drawing of the rack, and add the whole build to your cart in one go.
- Finish (choose above): black powder coat (RAL 9005) as standard; white (RAL 9016) or gunmetal grey (RAL 7016) +£20; Land Rover off white (RAL 9010) +£40; Land Rover colours +£80, each the closest RAL match to the original Land Rover paint code; any other colour +£120; galvanised +£150
- Mesh base: +£90 (choose above)
- Rear access ladder: £100
- Light / CB mounts: £12 each
- Awning mount plates, Hi-Lift jack mount plates and sand ladder mounts: £40 a pair
- Solid bases and custom mounts: message us for a price
Lead time
Every rack is made to order. Lead time: 3-5 Weeks (depending on area). If you need something custom, get in touch before ordering.
Handmade Defender 90 flat roof rack from MCB 4x4, built to order from steel in their Huddersfield workshop, where they have been making roof racks since 2004.
A flat rack, exactly as it sounds: there is nothing above the base of the rack. It sits around 50mm above the roof of your Defender 90, so you can still use multi-storey car parks and most garages, and it gives you a strong platform for a roof tent, roof box, sand ladders or general kit.
Construction
- Mild steel, hand welded
- Zinc primed, then powder coated in satin black as standard (other finishes below)
- Lighter than most aluminium racks
- Made to fit the Defender 90
Options and extras
Design it your way: open this rack in our roof rack builder to choose the finish, mesh and mounts, place each mount on a drawing of the rack, and add the whole build to your cart in one go.
- Finish (choose above): black powder coat (RAL 9005) as standard; white (RAL 9016) or gunmetal grey (RAL 7016) +£20; Land Rover off white (RAL 9010) +£40; Land Rover colours +£80, each the closest RAL match to the original Land Rover paint code; any other colour +£120; galvanised +£150
- Mesh base: +£90 (choose above)
- Rear access ladder: £100
- Light / CB mounts: £12 each
- Awning mount plates, Hi-Lift jack mount plates and sand ladder mounts: £40 a pair
- Solid bases and custom mounts: message us for a price
Lead time
Every rack is made to order. Lead time: 3-5 Weeks (depending on area). If you need something custom, get in touch before ordering.
Recovery Swivels for the Land Rover. Made in the UK by DDS Metals.
Strong, properly mounted recovery points are essential for safe off-road recovery. These DDS parts give you a secure anchorage designed for the job.
Details: Made from 20mm bar, CNC formed, with CNC turned spigots for precision, fully welded and zinc passivate plated.
Fits: Land Rover
DDS part number: ACRECSWIV1
Not sure this is the right part for your vehicle? Get in touch with your vehicle details or VIN and we'll confirm fitment before you order.
Towing Eye Hex Head Bolt Kit with Plates, A4-80 Stainless for the Land Rover. Made in the UK by DDS Metals.
Towing parts need to be strong, correctly located and free from corrosion. DDS towing components are made in heavy-section steel to suit the vehicle's original mounting points.
Fits: Land Rover
DDS part number: BKTESS2
Land Rover part number (for reference): 577509
Not sure this is the right part for your vehicle? Get in touch with your vehicle details or VIN and we'll confirm fitment before you order.
Towing Eye Hex Head Bolt Kit, A4-80 Stainless (Defender, Discovery 1, Range Rover Classic) for the Land Rover Defender, Discovery 1, Range Rover Classic. Made in the UK by DDS Metals.
Towing parts need to be strong, correctly located and free from corrosion. DDS towing components are made in heavy-section steel to suit the vehicle's original mounting points.
Fits: Defender, Discovery 1, Range Rover Classic
DDS part number: BKTESS1
Not sure this is the right part for your vehicle? Get in touch with your vehicle details or VIN and we'll confirm fitment before you order.
A pair of sand ladder mounts, added to your MCB 4x4 roof rack when it’s made.
Choose where they go in the roof rack builder, or tell us in the placement box when you order.
Hand made to order in the UK. Lead time: 3-5 Weeks (depending on area).