Accessories & Protection
Hand made to order in the UK.
Please allow 4 to 6 weeks for production and delivery.
Rear ladder for purchase with any roof rack, custom made to your vehicle.
Hand made to order in the UK.
Please allow 4 to 6 weeks for production and delivery.
Handmade Defender 90 roof tent roof rack from MCB 4x4, built to order from steel in their Huddersfield workshop, where they have been making roof racks since 2004.
A roof tent rack for the Defender 90, with an upper rail around the front only. It sits halfway between a flat rack and an expedition rack, and the front rail protects your tent from branches.
Construction
- Mild steel, hand welded
- Zinc primed, then powder coated in satin black
- Lighter than most aluminium racks
- Made to fit the Defender 90
Options and extras
- Mesh base: +£90 (choose above)
- Rear access ladder: £100
- Light / CB mounts: £12 each
- Awning, sand ladder and Hi-Lift jack mounts, solid bases and custom mounts: message us for a price
Lead time
Every rack is made to order, so please allow up to 4 to 6 weeks at busy times. If you need something custom, get in touch before ordering.
Handmade Defender 110 roof tent roof rack from MCB 4x4, built to order from steel in their Huddersfield workshop, where they have been making roof racks since 2004.
A roof tent rack for the Defender 110, with an upper rail around the front only. It sits halfway between a flat rack and an expedition rack, and the front rail protects your tent from branches.
Construction
- Mild steel, hand welded
- Zinc primed, then powder coated in satin black
- Lighter than most aluminium racks
- Made to fit the Defender 110
Options and extras
- Mesh base: +£90 (choose above)
- Rear access ladder: £100
- Light / CB mounts: £12 each
- Awning, sand ladder and Hi-Lift jack mounts, solid bases and custom mounts: message us for a price
Lead time
Every rack is made to order, so please allow up to 4 to 6 weeks at busy times. If you need something custom, get in touch before ordering.
Handmade Defender 110 expedition roof rack from MCB 4x4, built to order from steel in their Huddersfield workshop, where they have been making roof racks since 2004.
An expedition rack for the Defender 110, with an upper rail around the whole rack. This makes it easier to keep smaller boxes, bags and jerry cans on the roof, but it does add height.
Construction
- Mild steel, hand welded
- Zinc primed, then powder coated in satin black
- Lighter than most aluminium racks
- Made to fit the Defender 110
Options and extras
- Mesh base: +£90 (choose above)
- Rear access ladder: £100
- Light / CB mounts: £12 each
- Awning, sand ladder and Hi-Lift jack mounts, solid bases and custom mounts: message us for a price
Lead time
Every rack is made to order, so please allow up to 4 to 6 weeks at busy times. If you need something custom, get in touch before ordering.
Handmade Defender 110 flat roof rack from MCB 4x4, built to order from steel in their Huddersfield workshop, where they have been making roof racks since 2004.
A flat rack, exactly as it sounds: there is nothing above the base of the rack. It sits around 50mm above the roof of your Defender 110, so you can still use multi-storey car parks and most garages, and it gives you a strong platform for a roof tent, roof box, sand ladders or general kit.
Construction
- Mild steel, hand welded
- Zinc primed, then powder coated in satin black
- Lighter than most aluminium racks
- Made to fit the Defender 110
Options and extras
- Mesh base: +£90 (choose above)
- Rear access ladder: £100
- Light / CB mounts: £12 each
- Awning, sand ladder and Hi-Lift jack mounts, solid bases and custom mounts: message us for a price
Lead time
Every rack is made to order, so please allow up to 4 to 6 weeks at busy times. If you need something custom, get in touch before ordering.
Handmade Defender 110 half roof rack from MCB 4x4, built to order from steel in their Huddersfield workshop, where they have been making roof racks since 2004.
A shorter half-length rack for the Defender 110. It's lighter and cheaper than a full-length rack, and ideal for carrying a spare wheel, a roof box or lights while leaving the rest of the roof clear.
Construction
- Mild steel, hand welded
- Zinc primed, then powder coated in satin black
- Lighter than most aluminium racks
- Made to fit the Defender 110
Options and extras
- Mesh base: +£90 (choose above)
- Rear access ladder: £100
- Light / CB mounts: £12 each
- Awning, sand ladder and Hi-Lift jack mounts, solid bases and custom mounts: message us for a price
Lead time
Every rack is made to order, so please allow up to 4 to 6 weeks at busy times. If you need something custom, get in touch before ordering.
Handmade Defender 110 Crew Cab expedition roof rack from MCB 4x4, built to order from steel in their Huddersfield workshop, where they have been making roof racks since 2004.
An expedition rack for the Defender 110 Crew Cab, with an upper rail around the whole rack. This makes it easier to keep smaller boxes, bags and jerry cans on the roof, but it does add height.
Construction
- Mild steel, hand welded
- Zinc primed, then powder coated in satin black
- Lighter than most aluminium racks
- Made to fit the Defender 110 Crew Cab
Options and extras
- Mesh base: +£90 (choose above)
- Rear access ladder: £100
- Light / CB mounts: £12 each
- Awning, sand ladder and Hi-Lift jack mounts, solid bases and custom mounts: message us for a price
Lead time
Every rack is made to order, so please allow up to 4 to 6 weeks at busy times. If you need something custom, get in touch before ordering.
Handmade Defender 110 Crew Cab flat roof rack from MCB 4x4, built to order from steel in their Huddersfield workshop, where they have been making roof racks since 2004.
A flat rack, exactly as it sounds: there is nothing above the base of the rack. It sits around 50mm above the roof of your Defender 110 Crew Cab, so you can still use multi-storey car parks and most garages, and it gives you a strong platform for a roof tent, roof box, sand ladders or general kit.
Construction
- Mild steel, hand welded
- Zinc primed, then powder coated in satin black
- Lighter than most aluminium racks
- Made to fit the Defender 110 Crew Cab
Options and extras
- Mesh base: +£90 (choose above)
- Rear access ladder: £100
- Light / CB mounts: £12 each
- Awning, sand ladder and Hi-Lift jack mounts, solid bases and custom mounts: message us for a price
Lead time
Every rack is made to order, so please allow up to 4 to 6 weeks at busy times. If you need something custom, get in touch before ordering.
Handmade Discovery 2 flat roof rack from MCB 4x4, built to order from steel in their Huddersfield workshop, where they have been making roof racks since 2004.
A flat rack, exactly as it sounds: there is nothing above the base of the rack. It sits around 50mm above the roof of your Discovery 2, so you can still use multi-storey car parks and most garages, and it gives you a strong platform for a roof tent, roof box, sand ladders or general kit.
Construction
- Mild steel, hand welded
- Zinc primed, then powder coated in satin black
- Lighter than most aluminium racks
- Made to fit the Discovery 2
Options and extras
- Mesh base: +£90 (choose above)
- Rear access ladder: £100
- Light / CB mounts: £12 each
- Awning, sand ladder and Hi-Lift jack mounts, solid bases and custom mounts: message us for a price
Lead time
Every rack is made to order, so please allow up to 4 to 6 weeks at busy times. If you need something custom, get in touch before ordering.
Handmade Discovery 2 expedition roof rack from MCB 4x4, built to order from steel in their Huddersfield workshop, where they have been making roof racks since 2004.
An expedition rack for the Discovery 2, with an upper rail around the whole rack. This makes it easier to keep smaller boxes, bags and jerry cans on the roof, but it does add height.
Construction
- Mild steel, hand welded
- Zinc primed, then powder coated in satin black
- Lighter than most aluminium racks
- Made to fit the Discovery 2
Options and extras
- Mesh base: +£90 (choose above)
- Rear access ladder: £100
- Light / CB mounts: £12 each
- Awning, sand ladder and Hi-Lift jack mounts, solid bases and custom mounts: message us for a price
Lead time
Every rack is made to order, so please allow up to 4 to 6 weeks at busy times. If you need something custom, get in touch before ordering.
Handmade Discovery 2 half roof rack from MCB 4x4, built to order from steel in their Huddersfield workshop, where they have been making roof racks since 2004.
A shorter half-length rack for the Discovery 2. It's lighter and cheaper than a full-length rack, and ideal for carrying a spare wheel, a roof box or lights while leaving the rest of the roof clear.
Construction
- Mild steel, hand welded
- Zinc primed, then powder coated in satin black
- Lighter than most aluminium racks
- Made to fit the Discovery 2
Options and extras
- Mesh base: +£90 (choose above)
- Rear access ladder: £100
- Light / CB mounts: £12 each
- Awning, sand ladder and Hi-Lift jack mounts, solid bases and custom mounts: message us for a price
Lead time
Every rack is made to order, so please allow up to 4 to 6 weeks at busy times. If you need something custom, get in touch before ordering.
Handmade Defender 90 expedition roof rack from MCB 4x4, built to order from steel in their Huddersfield workshop, where they have been making roof racks since 2004.
An expedition rack for the Defender 90, with an upper rail around the whole rack. This makes it easier to keep smaller boxes, bags and jerry cans on the roof, but it does add height.
Construction
- Mild steel, hand welded
- Zinc primed, then powder coated in satin black
- Lighter than most aluminium racks
- Made to fit the Defender 90
Options and extras
- Mesh base: +£90 (choose above)
- Rear access ladder: £100
- Light / CB mounts: £12 each
- Awning, sand ladder and Hi-Lift jack mounts, solid bases and custom mounts: message us for a price
Lead time
Every rack is made to order, so please allow up to 4 to 6 weeks at busy times. If you need something custom, get in touch before ordering.
Handmade Defender 90 flat roof rack from MCB 4x4, built to order from steel in their Huddersfield workshop, where they have been making roof racks since 2004.
A flat rack, exactly as it sounds: there is nothing above the base of the rack. It sits around 50mm above the roof of your Defender 90, so you can still use multi-storey car parks and most garages, and it gives you a strong platform for a roof tent, roof box, sand ladders or general kit.
Construction
- Mild steel, hand welded
- Zinc primed, then powder coated in satin black
- Lighter than most aluminium racks
- Made to fit the Defender 90
Options and extras
- Mesh base: +£90 (choose above)
- Rear access ladder: £100
- Light / CB mounts: £12 each
- Awning, sand ladder and Hi-Lift jack mounts, solid bases and custom mounts: message us for a price
Lead time
Every rack is made to order, so please allow up to 4 to 6 weeks at busy times. If you need something custom, get in touch before ordering.
Recovery Swivels for the Land Rover. Made in the UK by DDS Metals.
Strong, properly mounted recovery points are essential for safe off-road recovery. These DDS parts give you a secure anchorage designed for the job.
Details: Made from 20mm bar, CNC formed, with CNC turned spigots for precision, fully welded and zinc passivate plated.
Fits: Land Rover
DDS part number: ACRECSWIV1
Not sure this is the right part for your vehicle? Get in touch with your vehicle details or VIN and we'll confirm fitment before you order.
Towing Eye Hex Head Bolt Kit with Plates, A4-80 Stainless for the Land Rover. Made in the UK by DDS Metals.
Towing parts need to be strong, correctly located and free from corrosion. DDS towing components are made in heavy-section steel to suit the vehicle's original mounting points.
Fits: Land Rover
DDS part number: BKTESS2
Land Rover part number (for reference): 577509
Not sure this is the right part for your vehicle? Get in touch with your vehicle details or VIN and we'll confirm fitment before you order.
Towing Eye Hex Head Bolt Kit, A4-80 Stainless (Defender, Discovery 1, Range Rover Classic) for the Land Rover Defender, Discovery 1, Range Rover Classic. Made in the UK by DDS Metals.
Towing parts need to be strong, correctly located and free from corrosion. DDS towing components are made in heavy-section steel to suit the vehicle's original mounting points.
Fits: Defender, Discovery 1, Range Rover Classic
DDS part number: BKTESS1
Not sure this is the right part for your vehicle? Get in touch with your vehicle details or VIN and we'll confirm fitment before you order.
Rear Chassis Rail Towing / Lashing Bracket for the Land Rover Defender. Made in the UK by DDS Metals.
The rear of a Land Rover chassis takes the worst of the water, salt and mud thrown up by the rear wheels. Rather than replacing the whole chassis, a rear section can be grafted onto sound front rails, saving a great deal of time and money while restoring full strength.
Details: Made from 12mm solid bar.
Fits: Land Rover Defender
DDS part number: AFW700020
Land Rover part number (for reference): AFW700020
Not sure this is the right part for your vehicle? Get in touch with your vehicle details or VIN and we'll confirm fitment before you order.
Welded Jate Ring Recovery Point for the Land Rover. Made in the UK by DDS Metals.
Strong, properly mounted recovery points are essential for safe off-road recovery. These DDS parts give you a secure anchorage designed for the job.
Details: Made from 10mm steel and 16mm solid bar, CNC laser cut and fully welded for strength. Supplied with a 10mm bolt and nut.
Fits: Land Rover
DDS part number: ACJR
Not sure this is the right part for your vehicle? Get in touch with your vehicle details or VIN and we'll confirm fitment before you order.
Discovery 3 / 4 & Range Rover Sport Discreet Winch Mount for the Land Rover Discovery 3, Discovery 4, Range Rover Sport. Made in the UK by DDS Metals.
A winch bumper gives you a strong, properly braced mounting point for a recovery winch, replacing the standard bumper. DDS winch bumpers are built from heavy-section steel designed to take real recovery loads.
Details: Fits behind the front bumper & attaches to the front chassis main body manufactured in 5mm steel with sold bar CNC turned & 3mm steel brackets.
Fits: Discovery 3, Discovery 4, Range Rover Sport
DDS part number: LRB9300
Not sure this is the right part for your vehicle? Get in touch with your vehicle details or VIN and we'll confirm fitment before you order.
Handmade Discovery 2 roof tent roof rack from MCB 4x4, built to order from steel in their Huddersfield workshop, where they have been making roof racks since 2004.
A roof tent rack for the Discovery 2, with an upper rail around the front only. It sits halfway between a flat rack and an expedition rack, and the front rail protects your tent from branches.
Construction
Options and extras
Lead time
Every rack is made to order, so please allow up to 4 to 6 weeks at busy times. If you need something custom, get in touch before ordering.