LOF Pioneer 4x4 Clutch Hose - Disco 2
LOF Pioneer 4x4 Clutch Hose - Disco 2

Pioneer 4x4 Clutch Hose - Disco 2

£80.40

A Pioneer 4x4 stainless steel braided clutch hose for the Land Rover Discovery 2 Td5. It runs directly from the master cylinder to the slave cylinder (FTC5202).

Discovery 2 clutch hydraulics are known to be awkward to bleed because of how the original pipe is routed. This flexible braided hose makes routing and bleeding much easier.

Key Features

  • Direct run: Connects straight from the master cylinder to the slave cylinder.

  • Easier bleeding: Flexible routing avoids the awkward run of the original pipe.

  • Stainless construction: Braided stainless steel hose with stainless steel fittings.

  • Lifetime warranty: Covered by Pioneer 4x4's lifetime warranty as standard.

Specifications

  • Hose: Braided stainless steel

  • Fittings: Stainless steel

  • Connects to: Slave cylinder FTC5202

Fits

  • Land Rover Discovery 2 – Td5

A Pioneer 4x4 stainless steel braided clutch hose for the Land Rover Discovery 2 Td5. It runs directly from the master cylinder to the slave cylinder (FTC5202).

Discovery 2 clutch hydraulics are known to be awkward to bleed because of how the original pipe is routed. This flexible braided hose makes routing and bleeding much easier.

Key Features

  • Direct run: Connects straight from the master cylinder to the slave cylinder.

  • Easier bleeding: Flexible routing avoids the awkward run of the original pipe.

  • Stainless construction: Braided stainless steel hose with stainless steel fittings.

  • Lifetime warranty: Covered by Pioneer 4x4's lifetime warranty as standard.

Specifications

  • Hose: Braided stainless steel

  • Fittings: Stainless steel

  • Connects to: Slave cylinder FTC5202

Fits

  • Land Rover Discovery 2 – Td5

Description

This kit will replace the Discovery 2 Clutch Line directly from the master to the slave, this is for models WITHOUT the decent control switch on the drivers wheel arch.

Hand built.

What Is Included 

  • Stainless steel braided clutch line

  • Plain stainless steel banjo bolts (if the fittings require them)

  • Copper crush washers (if the fittings require them)

  • Installation leaflet

  • No-quibble Lifetime Warranty

Specifications

  • Line inner material          PTFE

  • Line outer material          Stainless steel (303/304) and protective PVC cover

  • Fitting’s material                Stainless steel (303/304)

  • Temperature range         -70°C to 260°C (-94°F to 500°F)

  • Inside diameter                3.5mm (0.138″)

  • Outside diameter             7.5mm (0.295″)

  • Maximum working pressure        290 Bar (4206 PSI)

  • Burst pressure                   870 Bar (12618 PSI)

  • Minimum bend radius    38mm (1.496″)