Pioneer 4x4 Braided Brake Line Kit (3 Line) - Defender 200/300Tdi
Pioneer 4x4 Braided Brake Line Kit (3 Line) - Defender 200/300Tdi

Pioneer 4x4 Braided Brake Line Kit (3 Line) - Defender 200/300Tdi

£139.20

Braided brake line kit for the Land Rover Defender 200Tdi and 300Tdi. Stainless steel braided hose with a PTFE inner liner and stainless steel fittings throughout, finished with a protective PVC outer cover. Handmade in the UK by Pioneer 4x4 as a direct replacement for the original flexible rubber hoses.

A rubber brake hose swells slightly every time you press the pedal, which soaks up pressure and gives a soft, vague pedal. A braided line with a PTFE core barely expands, so the pedal feels firmer and more consistent. The stainless braid and fittings also stand up well to mud, salt and abrasion.

What's Included

  • 2x front lines, chassis to hub bracket (replace OE NRC7874)

  • 1x rear line, chassis to rear axle T piece (replaces OE NRC9455)

Specifications

  • Line inner: PTFE

  • Line outer: Stainless steel (303/304) braid with PVC cover

  • Fittings: Stainless steel (303/304)

  • Inside diameter: 3.5mm

  • Outside diameter: 7.5mm

  • Max working pressure: 290 bar

  • Burst pressure: 870 bar

  • Temperature range: -70°C to 260°C

  • Line length: Standard

Fits

  • Land Rover Defender 90, 110 and 130 with 200Tdi or 300Tdi

Good to Know

  • Bleed the brake system fully after fitting.

Braided brake line kit for the Land Rover Defender 200Tdi and 300Tdi. Stainless steel braided hose with a PTFE inner liner and stainless steel fittings throughout, finished with a protective PVC outer cover. Handmade in the UK by Pioneer 4x4 as a direct replacement for the original flexible rubber hoses.

A rubber brake hose swells slightly every time you press the pedal, which soaks up pressure and gives a soft, vague pedal. A braided line with a PTFE core barely expands, so the pedal feels firmer and more consistent. The stainless braid and fittings also stand up well to mud, salt and abrasion.

What's Included

  • 2x front lines, chassis to hub bracket (replace OE NRC7874)

  • 1x rear line, chassis to rear axle T piece (replaces OE NRC9455)

Specifications

  • Line inner: PTFE

  • Line outer: Stainless steel (303/304) braid with PVC cover

  • Fittings: Stainless steel (303/304)

  • Inside diameter: 3.5mm

  • Outside diameter: 7.5mm

  • Max working pressure: 290 bar

  • Burst pressure: 870 bar

  • Temperature range: -70°C to 260°C

  • Line length: Standard

Fits

  • Land Rover Defender 90, 110 and 130 with 200Tdi or 300Tdi

Good to Know

  • Bleed the brake system fully after fitting.