Pedders Urethane Panhard Rod Bush (Pair) for Range Rover Classic
Pedders Urethane Panhard Rod Bush (Pair) for Range Rover Classic

Pedders Urethane Panhard Rod Bush (Pair) – Range Rover Classic (EP9034)

£29.24
Limited Stock

Pedders Urethane Bushes

Pedders Urethane bushes have a high capacity to bear tension, compression and friction and retain their hardness, even under the most adverse conditions. This makes them well suited to the demands of heavy load carrying, firm suspension control or where regular exposure to corrosive materials is expected.

Features & Benefits

  • Hardened crush tubes for longer life and to eliminate slippage or creep.
  • A double helix, used against the outer diameter of the crush tube. The double helix maintains axial location while allowing full rotation of the pivot. It also acts as a grease reservoir that further increases product life.
  • Knurling. For extra protection against adverse wear in heavily laden bushings.
  • Bullet Grooves. These provide the correct pre-load while at the same time accommodating a wide variance in sizes and maintaining free pivoting of the bushings

Product information

  • Bush Type: 8034R
  • Outer Diameter [mm]: 27.2
  • Inner Diameter [mm]: 19
  • Length [mm]: 21
  • Material: PU (Polyurethane)
  • C/Tube Size: 19x13.2x44 mm
  • Flange Thickness [mm]: 5

Fits

  • Range Rover Classic (Coil Springs), 1972–1994 – Front Panhard Rod / Watts Link Bushes

Check the fitment above against your vehicle before ordering. If you are not sure, send us your registration through the contact form and we will confirm it fits.

Pedders part number: EP9034

lcm-avail:EP9034=mfr

Pedders Urethane Bushes

Pedders Urethane bushes have a high capacity to bear tension, compression and friction and retain their hardness, even under the most adverse conditions. This makes them well suited to the demands of heavy load carrying, firm suspension control or where regular exposure to corrosive materials is expected.

Features & Benefits

  • Hardened crush tubes for longer life and to eliminate slippage or creep.
  • A double helix, used against the outer diameter of the crush tube. The double helix maintains axial location while allowing full rotation of the pivot. It also acts as a grease reservoir that further increases product life.
  • Knurling. For extra protection against adverse wear in heavily laden bushings.
  • Bullet Grooves. These provide the correct pre-load while at the same time accommodating a wide variance in sizes and maintaining free pivoting of the bushings

Product information

  • Bush Type: 8034R
  • Outer Diameter [mm]: 27.2
  • Inner Diameter [mm]: 19
  • Length [mm]: 21
  • Material: PU (Polyurethane)
  • C/Tube Size: 19x13.2x44 mm
  • Flange Thickness [mm]: 5

Fits

  • Range Rover Classic (Coil Springs), 1972–1994 – Front Panhard Rod / Watts Link Bushes

Check the fitment above against your vehicle before ordering. If you are not sure, send us your registration through the contact form and we will confirm it fits.

Pedders part number: EP9034

lcm-avail:EP9034=mfr