td5-clutch-hose-discovery2.png
td5-clutch-hose-discovery2.png

Pioneer 4x4 Clutch Hose - Disco 2

£66.60

Stainless Steel Braided hose to fit TD5 Discovery 2 vehicles, this line connects straight from the master cylinder to the slave cylinder FTC5202

Discovery 2 clutch hydraulics are known to be a pain to bleed due to the routing of the original pipe, this flexible braided hose allows for easy bleeding and routing.

The kit is made from stainless steel fittings and braided stainless steel hose that comes with a Pioneer 4×4 lifetime warranty as standard.

Stainless Steel Braided hose to fit TD5 Discovery 2 vehicles, this line connects straight from the master cylinder to the slave cylinder FTC5202

Discovery 2 clutch hydraulics are known to be a pain to bleed due to the routing of the original pipe, this flexible braided hose allows for easy bleeding and routing.

The kit is made from stainless steel fittings and braided stainless steel hose that comes with a Pioneer 4×4 lifetime warranty as standard.

Description

This kit will replace the Discovery 2 Clutch Line directly from the master to the slave, this is for models WITHOUT the decent control switch on the drivers wheel arch.

Hand built.

What Is Included 

  • Stainless steel braided clutch line

  • Plain stainless steel banjo bolts (if the fittings require them)

  • Copper crush washers (if the fittings require them)

  • Installation leaflet

  • No-quibble Lifetime Warranty

Specifications

  • Line inner material          PTFE

  • Line outer material          Stainless steel (303/304) and protective PVC cover

  • Fitting’s material                Stainless steel (303/304)

  • Temperature range         -70°C to 260°C (-94°F to 500°F)

  • Inside diameter                3.5mm (0.138″)

  • Outside diameter             7.5mm (0.295″)

  • Maximum working pressure        290 Bar (4206 PSI)

  • Burst pressure                   870 Bar (12618 PSI)

  • Minimum bend radius    38mm (1.496″)