POWERspec Ford Ranger 2.5 TDCi / 3.0 TDCi (06’-12) ER61/ER69 Solid Mass Flywheel clutch kit

Perfect for vehicles with a Stage2 map / Heavy Towing / Off-roading

• 1x LOF HD Drive plate, fitted with Woven organic 0.4μ high friction Coefficient

• 1x LOF HD POWERspec clutch cover, +40% Clamp load over original

• 1x LOF Solid mass flywheel

• 8x Flywheel bolts, coated in loctite

• 6x Clutch cover bolts, coated in loctite

• 1x Release bearing

• 1x Ford Pilot/ spigot bearing

• 1x Clutch alignment tool from LOF

• 10ml Spline assembly grease

• 2 year LOF Warranty

POWERspec Ford Ranger 2.5 TDCi / 3.0 TDCi (06’-12) ER61/ER69 Solid Mass Flywheel clutch kit

Perfect for vehicles with a Stage2 map/ Heavy Towing/ Off-roading

• 1x LOF HD Drive plate, fitted with Woven organic 0.4μ high friction Coefficient

• 1x LOF HD POWERspec clutch cover, +40% Clamp load over original

• 1x LOF Solid mass flywheel

• 8x Flywheel bolts, coated in loctite

• 6x Clutch cover bolts, coated in loctite

• 1x Release bearing

• 1x Ford Pilot/ spigot bearing

• 1x Clutch alignment tool from LOF

• 10ml Spline assembly grease

• 2 year LOF Warranty

Will this fit my vehicle?

• Ford Ranger (2006-2012) 2.5 TDCi / 3.0 TDCi

• Diameter: 250mm

• Spline: 23 teeth

• OE kit number: N/A

• OE Cover number: N/A

• OE Plate number: N/A

• OE spigot bearing number: N/A (Integrated into flywheel)

• OE Release bearing number: 4637199

If you would like to double check LOF’s kit is right for your vehicle, please email us your UK Registration Number or Chassis Number (Email:info@lcm4×4.co.uk)

The POWERspec is the next stage up, ideal if you use your Ford Ranger as a work horse.

If you tow regularly or carry any extra weight like expedition trucks do then this is the spec for you. It’ll handle highly tuned road monsters or hard worked off-roaders all day long.

If you want reliability and drivability from your mapped motor the POWERspec will keep you moving forward!
(Pedal weight not noticeably heavier than original)